Hynall Intelligent Control Co. Ltd
Solution provider for all kinds of microwave detection.
Add to Cart
12V DC PIR Motion Sensor with bluetooth Mesh 0-10v dimming control, remote control setting
Description of Motion Sensor
Motion Sensor is a wired PIR & Mcirowave detector. It adopts advanced technology in signal processing, and provides an excellent detection ability. When an intruder enter into the detecting area, an infrared heating signal, received by the Fresnel lens, would be sent out and focused on the infrared sensor. After compare, analysis and calculation by a microprocessor, it would output an accurate alarm signal.
Features:
| 1. | Input voltage 12V-24V DC |
| 2. | 0~10V dimming signal,task tuning (10-100%). |
| 3. | Bluetooth operation frequency 2.4GHz - 2.483 GHz |
| 4. | Bluetooth transmission power: 4dBm |
| 5. | Input current:≧20mA |
| 6. | Bluetooth transmission range: 10-30m ( Typical indoor). |
| 7. | Autonomous sensor-based control |
| 8. | OTA firmware upgrade. |
| 9. | RoHs compliant |
Function Performance
1. SENSOR ON
When user turns on the sensor the lamp dims to 30%, if the ambient light reaches about 450lux or above and ignores the movements. The lamp turns 100% on if the movement is detected and the ambient light is under 450lux simultaneously, it will dim to 30% as the movement is disappeared and the holdtime 20min counts out.
2. SENSOR OFF
The lamp is not controlled by the sensor, it works as a normal lamp.
