Hynall Intelligent Control Co. Ltd
Solution provider for all kinds of microwave detection.
Add to Cart
NEW remote control IR21 12V DC input daylight harvest sensor HNS111DH
Features--
| Input voltage: 12V-24V DC |
| Input current:≧25mA operation current |
| 0-10v dimming, available for daylight harvest function |
| Detection range: Max.12m in diameter, mounting height: max. 6m |
| Memory function, with one button commissioning, easy operation and user friendly |
| 0-10v leads can not be short -circuit. |
One-key memory commissioning
Start
Long press “Start” button for 2s till green LED permanent on ,then input all desired settings by
pressing the buttons in each function zone, the green LED will flicker once to indicate the operation
success.
*After 2s, start to input the parameters, interval time each function zone button will be within 10s.
Otherwise, need re-operate step 1 for memory scene.
Press “Memory” button to memorize all settings parameters.
Green LED will flicker ONCE to indicate the operation success.
Press “Apply” button to copy the same settings to other sensors, point the remote control to the
receiving sensor for min. 2s. Red LED will flicker to indicate the operation success, the receiving sensor
will buzz also to indicate success receival.