Hynall Intelligent Control Co. Ltd
Solution provider for all kinds of microwave detection.
Add to Cart
12V microwave sensor Tunable white motion sensor with 0~10V DC or PWM output
tunable white & tri-level dimming control
Quick Detail:
1. Dual daylight sensor
2. Remote control
3. Tunable white & Tri-level dimming control
Size:
Features:
| 1. | Operating voltage: | 12/24V DC |
| 2. | Input current: | ≥25mA |
| 3. | Detection range | up to 12m in diameter |
| 4. | Super compact | flexible to be integrated into any suitable fixtures |
| 5. | Mounting height: | 3〜6m |
| 6. | Operation temperature: | -20℃ ~ +70℃ |
| 7. | Two channels output: | 0~10V / PWM signal, achieve color temperature adjustments. |
8. Real Lux-Off function for built-in application.
9.Easy access by DIP switch to shift between cool, white and warm.
10. RoHS compliant.
Source current / Sink current: Max. 20mA; 0-10V leads can not be short-circuit.
Remote control Settings:
OCC OFF function
Press “OCC OFF” bution, the motion sensor will be disabled.
press “OCC ON” , “Reset” or “Ambient” to re-activate the motion sensor.
Dim
Press “Dim” button to automatically dim up or down the light brighness during hold-time from 10% to 100%. Another press to lock it down when
desired brightness is achieved.
OCC ON function
Press “OCC ON” button, the sensor starts to work and all settings remainthe same as the latest status before the light was switched on / off.
Reset function
Press “Reset” button, all sensor settings go back to factory default settings.
Ambient learn
Press “Ambient learn” button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
“Test mode”is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Users can quit this mode by pressing “ON/OFF”, “Reset”, or any button of “Hold time”. The sensor settings are changed accordingly .
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off.
In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off (0.5s soft off + 1.5s off).