Hynall Intelligent Control Co. Ltd
Solution provider for all kinds of microwave detection.
Add to Cart
12V microwave sensor Tunable white motion sensor with 0~10V DC or PWM output
tunable white & tri-level dimming control
Quick Detail:
1. Tunable white (2 channels output)
2. Tri-level dimming control by remote control
Size:
Features:
| 1. | Operating voltage: | 12/24V DC |
| 2. | Dual-processor technology | really for built-in application |
| 3. | Detection range | up to 12m in diameter |
| 4. | CCT quick selection (DIP switch) | DIP switch + IR Remote control 2 channels CCT setting |
| 5. | Mounting height: | 3〜6m |
| 6. | Two channels output | 0~10V / PWM signal, achieve color temperature adjustments. |
| 7. | RoHS compliant |
8. Super compact, flexible to be integrated into any suitable fixtures.
9.IR remote commissioning, easy setting and user friendly.
10.Easy access by DIP switch to shift between cool, white and warm.
Source current / Sink current: Max. 20mA; 0-10V leads can not be short-circuit.
Settings:
OCC OFF function
Press “OCC OFF” button, the motion sensor will be disabled.
Dim
Press “Dim” button to automatically dim up or down the light brighness during hold-time from 10% to 100%. Another press to lock it down when
desired brightness is achieved.
Reset function
Press “Reset” button, all sensor settings go back to factory default settings.
press “OCC ON” , “Reset” or “Ambient” to re-activate the motion sensor.
Factory default setting:
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
CCT=Neutral
Ambient learn
Press “Ambient learn” button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test mode
“Test mode”is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.
Test mode defaulted settings--
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
*
Users can quit this mode by pressing “ON/OFF”, “Reset”, or any button of “Hold time”. The sensor settings are changed accordingly .
In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off.
In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off (0.5s soft off + 1.5s off).
CCT Adjust
Cool: Long press to adjust the color temperature towards Cool , release to stop and lock down current color temperature.
Neutral: Press “Neutral” button, the color temperature will adjust to 50% cool + 50% warm.
Warm: Long press to adjust the color temperature towards Warm , release to stop and lock down current color temperature.